MetriScan Finger Bone Densitometer

MetriScan Finger Bone Densitometer

¥20,000.00
跳至产品信息
MetriScan Finger Bone Densitometer
  • MetriScan Finger Bone Densitometer
  • MetriScan Finger Bone Densitometer
  • MetriScan Finger Bone Densitometer
  • MetriScan Finger Bone Densitometer
MetriScan Finger Bone Densitometer

MetriScan Finger Bone Densitometer

Medical Device Name: MetriScan Finger Bone Densitometer

Model: MetriScan

Condition: Full Unit in Good Working Condition

Inventory Status: In stock

Product Overview


It is used for rapid and low-dose finger bone mineral density detection, assisting in the diagnosis of osteoporosis and assessment of fracture risk.

Core Principle & Detection Site


Technical Principle: Adopts Radiographic Absorptiometry (RA) combined with Storage Phosphor Technology (SPT) to measure bone mineral density via X-ray digital image absorption method.

Detection Site: Middle phalanges of the 2nd, 3rd and 4th fingers of the non-dominant hand.

Core Parameters: Automatically calculates T-score (compared with healthy young females for osteoporosis judgment) and Z-score (compared with population of the same age, gender and race to analyze the causes of bone loss).

Key Technical Parameters


  • Device Specification: Tabletop type; Dimension: 40.6cm×40.6cm×40.6cm; Weight: 18.8kg
  • X-ray Parameters: Voltage 60KV, Current 0.333mA, Exposure time: 0.3 seconds
  • Radiation Dose: Single effective dose 0.012μSv, approximately 1/10000 of a standard chest X-ray, safe and controllable.
  • Detection Efficiency: Exposure time＜1 second, test result available in 40 seconds, the whole process (including report printing) ≤ 2 minutes..

Display & Acquisition

  • 5.6-inch LCD touch display with backlight

  • Twelve-lead synchronous acquisition and recording, standard 12-lead recording

Electrical Performance

  • Input impedance: >50 MΩ (10 Hz)

  • Input circuit current: <50 nA

  • Frequency response: 0.05–150 Hz (-3 dB)

  • Gain: 1/4, 1/2, 1, 2 cm/mV, manual or automatic

  • Common mode rejection ratio (CMRR): >103 dB

  • Anti-polarization voltage: >550 mV

  • Defibrillation protection with anti-defibrillation function

  • Time constant: 3.2 seconds (0 ~ +20%)

Signal Processing

  • Filters: AC, EMG, baseline drift, high-frequency, and low-frequency filters

  • A/D resolution: 18-bit

  • Sampling rate: 8000 samples/sec/channel

Recording & Printing

  • Recording speed: 5, 10, 12.5, 25, 50 mm/s ±3%

  • Thermal print head resolution:

    • Vertical: 8 dots/mm

    • Time axis: 1 ms

  • Recording channels:

    • 3-channel

    • 3+1 (rhythm lead)

    • 3+2 (rhythm lead)

    • 6-channel

    • 6+1

    • 12-channel

  • Recording paper: 210 mm wide roll paper (A4)

  • Recording method: Built-in thermal array recorder, supporting automatic, manual, measurement, and analysis recording

  • Capable of printing ECG waveforms, measurement values, and analysis/diagnostic reports, including:

    • Rhythm analysis report

    • Arrhythmia analysis report

    • ST segment quantitative analysis report

    • R-R interval histogram and trend graph

Advanced Recording Functions

  • Record review: Playback of 24-second measured ECG waveforms or review of 10-second ECG waveforms

  • Post-exercise recording: Ability to record ECG waveforms after exercise or medication

  • Automatic arrhythmia extended recording: During analysis, when arrhythmia is detected, the system automatically prints an arrhythmia ECG report

Storage & Interfaces

  • Storage capacity: Main unit can store more than 300 sets of ECG data

  • Output display: Supports connection to a secondary display

  • Serial interface: Built-in RS-232C serial interface module (optional PC software)

Optional Functions

  • Optional PC card support, capable of storing several thousand ECG data records

  • Supports software upgrades